Camcorder Batteries

95Wh 14.8V 6600mAh Rechargeable Li-ion Battery for Broadcast Video Camcorder, Compatible with Sony HDCAM, XDCAM, Digital Cinema Cameras and Other Camcorders – Neewer V Mount/V Lock Battery

Neewer 10095778 - Micro computer of high precision controls the charging parts, which can assure accurate control when charging. Compatible with sony camcorders pmw-ex330k pmw-ex330l, pmw-580k pmw580l, blackmagic ursa mini, red epic, pmw-td300, pmw-f55 pmw-f5, hDW-F900R HDW-680 HDW-800P, red scARLET, PDW-680 PDW-700 PDW-850, and ARRI cameras.

4-level led indicator displays the battery status; Lightweight design and compatible with Sony V mount, long enough battery service life. Specifications: power: 95 W Charging Voltage: 16. 8 v nominal Voltage: 14. 8 v usb output: 5 V 2. 1 a rated capacity: 6600mAh Standard Charging: 03c 1950mah/5 h charging temperature: 0℃~45℃ discharge temperature: -20℃~50℃ Battery Weight: 580 g Dimension: 150*95*37.

8mm material of battery case: abs plastic package Contents: 1 x 95Wh V-Lock Battery 95wh 6600mah v mount lithium ion battery. Features d-tap and usb outputs for powering and charging auxiliary and mobile devices; Charge with any standard V Mount charger or D-Tap charger Note: Charger Not Included. Built-in protection circuitry to prevent battery from over-charging, and over-current.

95Wh 14.8V 6600mAh Rechargeable Li-ion Battery for Broadcast Video Camcorder, Compatible with Sony HDCAM, XDCAM, Digital Cinema Cameras and Other Camcorders - Neewer V Mount/V Lock Battery - Features d-tap and USB outputs for powering and charging auxiliary and mobile devices. Powers any standard or high-definition broadcast cameras, 4K digital cinema and 3D camera set-ups, DSLRs and handheld camcorders that accept V type battery. Fits all cameras and led lights with standard v-mount battery plates.

More information about Neewer 10095778

SMALLRIG SSD Mount Bracket SSD Holder for Samsung T5 SSD, Compatible with SMALLRIG Cage for BMPCC 4K & 6K- 2245

SMALLRIG - Installation】secure tightly on the cage via 2 m4 screws. The wingnuts on the top are designed to tighten the mount bracket and USB-C cable. High quality】made by aluminum alloy, sturdy and durable. Key features: 1. A dedicated mount for samsung t5 ssd, working with smallRig Cage for BMPCC 4K & 6K 2203/2255/2254; 2.

SMALLRIG SSD Mount Bracket SSD Holder for Samsung T5 SSD, Compatible with SMALLRIG Cage for BMPCC 4K & 6K- 2245 - Two m4 knob screws to firmly lock T5 SSD and its USB-C cable. Compatibility】compatible with smallrig bmpcc 4k & 6K Cage 2203/2255/2254. Compability: for blackmagic design pocket cinema camera 4k & 6k cage 2203 for Samsung T5 SSD Package Includes: 1 x SSD Mount 1 x Hex Spanner 2 x M4 Screw Product Dimensions: 72.

5 x 49 x 26. 6mm net weight: 58g materials: aluminum alloy high customization】the ssd mount can help you stablize the samsung t5 ssd when you use the BMPCC 4K & 6K camera equipped with SMALLRIG BMPCC 4K & 6K cage. Lightweight】weighs only 58g.

More information about SMALLRIG


Similar products



2203 - SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail

SMALLRIG 2203A-AU - It could be used on djI Ronin S or Zhiyun Crane 2 gimbal stabilizer. Mutiple moutings】this cage comes with multiple mounting points, like microphone or SmallRig Articulating Arm - 2070, cold shoe and 3/8'' locating holes for ARRI standard, such as 1/4'' & 3/8'' threaded holes, allow you to attach more accessories, etc.

Nato rail】features built-in nato rail that allows you to quickly release accessories with NATO clamp. Perfect protection】secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Compatibility】compatible with smallrig bmpcc 4k & 6K Cage 2203/2255/2254.

2203 - SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail - Rubber pads on the bottom protect your camera body from scratching. Securely locked by 1/4''-20 screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting 5. Mounting smallrig side Handle - 2187 for hand-held shooting. Key features: 1. For better setup, please search "smallrig mount for samsung t5 ssd 2245", "smallrig lens adatper support for metabones 2247" and "SmallRig HDMI cable clamp 2246", which are exclusively designed for BMPCC 4K & 6K.

Multiple mounting interfaces nato rails, 1/4''-20 and 3/8''-16 threaded holes, locating holes for ARRI standard and cold shoe for accessories 3. The wingnuts on the top are designed to tighten the mount bracket and USB-C cable.

More information about SMALLRIG 2203A-AU


Similar products



Dual D-Tap P Tap Travel Charger for Sony V-Mount/V Lock and Anton Bauer Gold Mount Batteries

D&O Lighting BC-C2 - For better setup, please search "smallrig mount for samsung t5 ssd 2245", "smallrig lens adatper support for metabones 2247" and "SmallRig HDMI cable clamp 2246", which are exclusively designed for BMPCC 4K & 6K. Dual d tap travel charger for sony v-mount battery or Anton Bauer Gold Mount battery with d-tap inputs.

Installation】secure tightly on the cage via 2 m4 screws. High customization】smallrig bmpcc cage is specifically designed for blackmagic design pocket cinema camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. Mounting smallrig side Handle - 2187 for hand-held shooting.

Dual D-Tap P Tap Travel Charger for Sony V-Mount/V Lock and Anton Bauer Gold Mount Batteries - The wingnuts on the top are designed to tighten the mount bracket and USB-C cable. High quality】made by aluminum alloy, sturdy and durable. Perfect protection】secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Input: ac 100-240v, 47-63hz Output: 16.

8v charge Current: 1. 0a x 2 product Dimensions: 4. 9 x 2. 8 x 1.

More information about D&O Lighting BC-C2


Similar products



Kastar Dual D-Tap Super Fast Charger with 4-pin XLR DC Output Adapter for Sony V Mount, V Lock Broadcast Battery, Anton Bauer Gold Mount, Red One MX, F3 FS700, 5D2, 5D3, D3, D700 and D800

Kastar DUAL-DTAP-3 - Installation】secure tightly on the cage via 2 m4 screws. Featured recommendations】compatible with ronin s and crane 2. Lightweight】weighs only 58g. The wingnuts on the top are designed to tighten the mount bracket and USB-C cable. High quality】made by aluminum alloy, sturdy and durable. Compatible with charger models:Sony BC-U1Sony BC-U23.

Please note: any batteries shown in the product images on this listing are not included with the shipment; they are for demonstration purposes only. Kastar dual d-tap p tap fast charger is perfect for charging any batteries with the d-tap socket Includes Sony BP-U65 BP-U68 battery, V-Mount / V Lock battery and Anton Bauer Gold Mount battery with D-Tap input.

For better setup, please search "smallrig mount for samsung t5 ssd 2245", "smallrig lens adatper support for metabones 2247" and "SmallRig HDMI cable clamp 2246", which are exclusively designed for BMPCC 4K & 6K. Dual d tap travel charger for sony v-mount battery or Anton Bauer Gold Mount battery with d-tap inputs.

Kastar Dual D-Tap Super Fast Charger with 4-pin XLR DC Output Adapter for Sony V Mount, V Lock Broadcast Battery, Anton Bauer Gold Mount, Red One MX, F3 FS700, 5D2, 5D3, D3, D700 and D800 - Package includes:1 x dual D-Tap Charger1 x 3-Prong Power Cord1. High customization】smallrig bmpcc cage is specifically designed for blackmagic design pocket cinema camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. Mutiple moutings】this cage comes with multiple mounting points, allow you to attach more accessories, cold shoe and 3/8'' locating holes for ARRI standard, such as 1/4'' & 3/8'' threaded holes, like microphone or SmallRig Articulating Arm - 2070, etc.

Nato rail】features built-in nato rail that allows you to quickly release accessories with NATO clamp.

More information about Kastar DUAL-DTAP-3


Similar products



2061 - SMALLRIG 15mm Railblock Rod Clamp with 1/4"-20 Thread for 15mm DSLR Camera Cage Shoulder Rig

SMALLRIG Railblock - Rubber pads on the bottom protect your camera body from scratching. Lightweight】weighs only 58g. Build in mcu, short circuit or overheat, which can prevent the overcharge and overdischarge. This charger compatible with:  sony bp-u65, and d700 and sony pmw-ex330k pmw-ex330l, pmw-td300, 5d2, pdw-680 pdw-700 pdw-850, pmw-580k pmw580l, red one mx, 5d3, hdw-f900r hdw-680 hdw-800p, v lock battery, d3, d800, bp-u68 and all batteries that have d-tap including sony V-Series V Mount Battery, Anton Bauer Gold Mount, f3 fs700, PMW-F55 PMW-F5 Professional Video Camcorder.

Smallrig super lightweight 15mm-Railblock 2061 includes 2pcs of super lightweight 15mm-Railblock. Each super lightweight 15mm-railblock-3 comes with two rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts. The adjustment of one wingnut will not affect the operation of the other wingnut.

In addition, it is equipped with an abundance of 1/4'' threaded holes for DIY operations. Compatibility: 15mm rodpackageincludes:2 x15mm-railblock-3 4 x 1/4''screwshort4 x 1/4''screwlong2 x hex spanner productdimensions: 110x10x42 mmnet Weight: 80gPackage Size: 120x100x40mmMaterials: Aluminum Alloy High customization】the ssd mount can help you stablize the samsung t5 ssd when you use the BMPCC 4K & 6K camera equipped with SMALLRIG BMPCC 4K & 6K cage.

2061 - SMALLRIG 15mm Railblock Rod Clamp with 1/4"-20 Thread for 15mm DSLR Camera Cage Shoulder Rig - Installation】secure tightly on the cage via 2 m4 screws. High customization】smallrig bmpcc cage is specifically designed for blackmagic design pocket cinema camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. Mutiple moutings】this cage comes with multiple mounting points, such as 1/4'' & 3/8'' threaded holes, like microphone or SmallRig Articulating Arm - 2070, allow you to attach more accessories, cold shoe and 3/8'' locating holes for ARRI standard, etc.

More information about SMALLRIG Railblock


Similar products



SMALLRIG Camera Base Plate with Rod Rail Clamp for Sony FS7, for Sony A7 Series, for Canon C100/C300/C500, for Panasonic GH5-1674

SMALLRIG 1674 - It could be used on djI Ronin S or Zhiyun Crane 2 gimbal stabilizer. 2. Build in mcu, short circuit or overheat, which can prevent the overcharge and overdischarge. This charger compatible with:  sony bp-u65, and d700 and sony pmw-ex330k pmw-ex330l, d3, pdw-680 pdw-700 pdw-850, f3 fs700, hdw-f900r hdw-680 hdw-800p, d800, bp-u68 and all batteries that have d-tap including sony V-Series V Mount Battery, red one mx, Anton Bauer Gold Mount, v lock battery, pmw-td300, 5d2, pmw-580k pmw580l, 5d3, PMW-F55 PMW-F5 Professional Video Camcorder.

Smallrig super lightweight 15mm-Railblock 2061 includes 2pcs of super lightweight 15mm-Railblock. Each super lightweight 15mm-railblock-3 comes with two rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts. The adjustment of one wingnut will not affect the operation of the other wingnut.

SMALLRIG Camera Base Plate with Rod Rail Clamp for Sony FS7, for Sony A7 Series, for Canon C100/C300/C500, for Panasonic GH5-1674 - In addition, it is equipped with an abundance of 1/4'' threaded holes for DIY operations. This low profile base plate is a simple and light base plate for the current popular cameras, Sony A7 series, for Canon C100/C300/C500, such as for Sony FS7, for Panasonic GH3/GH4/GH5 etc. Installation】secure tightly on the cage via 2 m4 screws.

It is equipped with 1/4''-20 and 3/8''-16 threaded holes at the bottom to attach quick release plate for tripod. 3. Charge two high capacity lithium ion batteries simultaneously.

More information about SMALLRIG 1674


Similar products



SMALLRIG 6 Inches 15 cm Black Aluminum Alloy 15mm Rod with M12 Female Thread, Pack of 2 - 1050

SMALLRIG COMINU042077 - It attaches to a camera with a 3/8"-16 or 1/4"-20 screw. The base plate features 15mm diameter and 60mm spaced rod holes that allows you to mount a follow focus, matte box, lens support or other accessories. It is specifically designed to keep the weight down and let the operator use the FS7's inbuilt shoulder pad, minimizing the amount of extra weight and gear needed for a rig.

With 1/4''-20 & 3/8''-16 threads on bottom, this base plate can be attached to any tripod. Length】length of 6 inches/15cm. Mounting smallrig side Handle - 2187 for hand-held shooting. It could be used on djI Ronin S or Zhiyun Crane 2 gimbal stabilizer. Please note: any batteries shown in the product images on this listing are not included with the shipment; they are for demonstration purposes only.

Kastar dual d-tap p tap fast charger is perfect for charging any batteries with the d-tap socket Includes Sony BP-U65 BP-U68 battery, V-Mount / V Lock battery and Anton Bauer Gold Mount battery with D-Tap input. Lightweight】weighs only 58g. Diameter】the diameter of the rods is industrial 15mm standard.

SMALLRIG 6 Inches 15 cm Black Aluminum Alloy 15mm Rod with M12 Female Thread, Pack of 2 - 1050 - High customization】smallrig bmpcc cage is specifically designed for blackmagic design pocket cinema camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. Rubber pads on the bottom protect your camera body from scratching.

This dual p-tap universal travel charger is perfect for charging V-mount batteries or Gold Mount batteries without needing to carry a larger 2-channel dual battery charger.

More information about SMALLRIG COMINU042077


Similar products



2027 - SmallRig NATO Top Handlegrip with Rod Clamp, Arri Locating Points, Quick Release Clamp and Hidden Hex Spanner

SmallRig 2027-CF - Input: ac 100v-240v; output: 16. 8v for two d-tap cables; 4-pin xlr dc output adapter to supply power to your camcorder or DSLR camera directly. The wingnuts on the top are designed to tighten the mount bracket and USB-C cable. High quality】made by aluminum alloy, sturdy and durable. Rubber pads on the bottom protect your camera body from scratching.

Compatibility】compatible with smallrig bmpcc 4k & 6K Cage 2203/2255/2254. This dual p-tap universal travel charger is perfect for charging V-mount batteries or Gold Mount batteries without needing to carry a larger 2-channel dual battery charger. Compatible with all batteries that have d-tap p-tap including sony v-series, f3 fs700, red one mx, Anton Bauer Gold Mount, 5d3, 5d2, d800, D3, and D700.

2027 - SmallRig NATO Top Handlegrip with Rod Clamp, Arri Locating Points, Quick Release Clamp and Hidden Hex Spanner - This nato top handle with rod clamp can be compatible with our many cages or cage kit, smallrig 1950 dmc-g85/g80 cage, smallrig 1844 gx8 cage, such as GX85/ GX80/ GX7 Mark II cage kit SmallRig 2009, such as our cages, x-t20 cage kit smallrig 2022, SmallRig 2004 Fujifilm X-T20 cage or our cage kits, SmallRig 2023 .

Mutiple moutings】this cage comes with multiple mounting points, cold shoe and 3/8'' locating holes for ARRI standard, such as 1/4'' & 3/8'' threaded holes, like microphone or SmallRig Articulating Arm - 2070, allow you to attach more accessories, etc. Nato rail】features built-in nato rail that allows you to quickly release accessories with NATO clamp.

Diameter】the diameter of the rods is industrial 15mm standard. Build in mcu, short circuit or overheat, which can prevent the overcharge and overdischarge.

More information about SmallRig 2027-CF


Similar products



UCEC Full HDMI to Full HDMI Coiled Cable for Atomos for Ninja Star Recorder11.8-17.7"

UCEC 4330113151 - Compatibility】mainly used on camera riser system and filmmaking accessories, follow focus, lens support, such as matte box, etc. High quality】made of 601 aluminum alloy, well finished and precise CNC processing, sturdy and durable. Rail clamp can be used for attaching a single rod, evf mount or microphone mount.

Please note: any batteries shown in the product images on this listing are not included with the shipment; they are for demonstration purposes only. Kastar dual d-tap p tap fast charger is perfect for charging any batteries with the d-tap socket Includes Sony BP-U65 BP-U68 battery, V-Mount / V Lock battery and Anton Bauer Gold Mount battery with D-Tap input.

UCEC Full HDMI to Full HDMI Coiled Cable for Atomos for Ninja Star Recorder11.8-17.7" - Both nato clamp and rod clamp can be controlled by wingnut by one hand. High customization】smallrig bmpcc cage is specifically designed for blackmagic design pocket cinema camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot.

Perfect protection】secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Charge two high capacity lithium ion batteries simultaneously. Charges any battery with a D-Tap socket including V-Lock series battery or gold mount battery. Lightweight】weighs only 58g.

Installation】secure tightly on the cage via 2 m4 screws.

More information about UCEC 4330113151


Similar products



SMALLRIG 15mm Carbon Fiber Rod for 15mm Rod Support System Non-Thread, 8 inches Long, Pack of 2-870

SMALLRIG 870 - Rubber pads on the bottom protect your camera body from scratching. It is the new version of carbon fiber rod with a more smooth surface. Notes: the product includes 2pcs of rods. Perfect protection】secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting.

Please note that the carbon fiber rods do not feature female thread. Both nato clamp and rod clamp can be controlled by wingnut by one hand. Length: 8 inches 20cm long. It attaches to a camera with a 3/8"-16 or 1/4"-20 screw. The base plate features 15mm diameter and 60mm spaced rod holes that allows you to mount a follow focus, matte box, lens support or other accessories.

It is specifically designed to keep the weight down and let the operator use the FS7's inbuilt shoulder pad, minimizing the amount of extra weight and gear needed for a rig. With 1/4''-20 & 3/8''-16 threads on bottom, this base plate can be attached to any tripod. Length】length of 6 inches/15cm. Mounting smallrig side Handle - 2187 for hand-held shooting.

SMALLRIG 15mm Carbon Fiber Rod for 15mm Rod Support System Non-Thread, 8 inches Long, Pack of 2-870 - High customization】smallrig bmpcc cage is specifically designed for blackmagic design pocket cinema camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. The wingnuts on the top are designed to tighten the mount bracket and USB-C cable.

More information about SMALLRIG 870


Similar products