Automotive Replacement Batteries

Camco 55363 Standard Battery Box – Group 24

Camco 55363 - Includes lift-off lid, durable woven hold-down strap, foot clamps and stainless steel screws. Fits group size 24 batteries. Inside dimensions = 7 ¼" wide x 10 3/4" long X 8 " Tall with 2" additonal head room for battery terminals. Meets uscg cfr 183. 420 and abyc E-107 specifications. Camco rv standard battery box is a black lightweight, heavy-duty corrosion-resistant polypropylene box which is designed to secure and protect the battery.

It includes lift-off lid, durable woven hold-down strap, foot clamps and stainless steel screws. Lightweight, heavy-duty corrosion-resistant polypropylene box. This box meets uSCG CFR 183. 420 and abyc e-0107 specifications. It fits group size 24 batteries with inside dimensions of lid 7 ¼” Wide X 10 3/4” Long X 8 ” Tall with 2” additonal head room for battery terminals.

More information about Camco 55363

Schumacher BAF-MT1 Marine Terminal End

Schumacher BAF-MT1 - Schumacher's marine terminal Ends are zinc plated and fit 3/8 inch and 5/16 inch posts. Three times more conductive. It is three times more conductive. Fit 3/8 inch and 5/16 inch posts. Zinc plated.

More information about Schumacher BAF-MT1


Similar products



Cartman 4AWG 18-Inch Battery Inverter Cables Set, 4Gauge x 18" 1 Black & 1 Red

Cartman - Cartman 18" 4awg, 3/8" stud premium marine quality battery cable wire is manufactured to the highest SAE standards. Heat-resistant up to 105C dry. Zinc plated. Cartman boat cable wire stays ultra flexible even in the most extreme conditions. Heat-resistant up to 105C. Pre-assembled with premium marine quality tin plated, 95%-copper lugs, each strand of individually tinned wire provides the greatest protection against corrosion and oxidation available.

Fit 3/8 inch and 5/16 inch posts. Three times more conductive. 4 awg wire, fits 3/8" stud. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Sae 4 gauge copper. Boat cable wire stays ultra flexible even in the most extreme conditions.

More information about Cartman


Similar products



Camco RV Leveling Scissor Jack Socket Drill Adapter With 1/4" Quick Connect Shank, Works With All 3/4" Hex Drive Jacks

Camco 48865 - The camco leveling scissor jack Socket is forged in one piece from carbon steel, so it is durable and meant to last a lifetime. Significantly reduce the amount of time it takes to raise and lower scissor jacks with Camco’s Quick Connect Scissor Jack Socket. Sae 4 gauge copper. Designed to work with 1/4-inch hex quick connect chucks.

Reduces time and effort to raise or lower scissor jacks. No need for hand cranks. Hex socket x 1/4-inch hex quick connect shank. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Heavy-duty forged construction. 4 awg wire, fits 3/8" stud. Three times more conductive. Fit 3/8 inch and 5/16 inch posts.

Camco RV Leveling Scissor Jack Socket Drill Adapter With 1/4" Quick Connect Shank, Works With All 3/4" Hex Drive Jacks - Boat cable wire stays ultra flexible even in the most extreme conditions. It is zinc plated to provide protection against corrosion. It is especially convenient in inclement weather when you just want to get back inside. Heat-resistant up to 105C. Zinc plated. Works with all 3/4" Hex drive jacks.

More information about Camco 48865


Similar products



Camco No Insect Bumper Cap Set - 2 Pack 40325 - Features Small Holes to Increase Airflow and Block Insects, Squeeze Grip for Easy Installation and Removal, Fits Standard RV 4" Square Bumpers

Camco 40325 - Squeeze grip for easy installation and removal. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Heat-resistant up to 105C. Replace lost or damaged rv bumper caps with Camco's No Insect RV Bumper Caps featuring small vent holes and squeeze grip for easy installation and removal. Designed to work with 1/4-inch hex quick connect chucks.

Reduces time and effort to raise or lower scissor jacks. No need for hand cranks. Hex socket x 1/4-inch hex quick connect shank. The caps fit standard 4” square RV bumpers. Having several small vent holes instead of one big hole allows for ventilation while keeping flying and nesting insects out. Durable polyethylene construction fits standard 4" square RV bumper.

Camco No Insect Bumper Cap Set - 2 Pack 40325 - Features Small Holes to Increase Airflow and Block Insects, Squeeze Grip for Easy Installation and Removal, Fits Standard RV 4" Square Bumpers - Sae 4 gauge copper. Ridged sides will help prevent the bumper cap from coming loose while driving down the road. 4 awg wire, fits 3/8" stud. Three times more conductive. Boat cable wire stays ultra flexible even in the most extreme conditions. Constructed of durable polyethylene and comes in a pack of 2.

More information about Camco 40325


Similar products



Camco T Level- Assists You in Leveling Your RV 25543

Camco 25543 - Boat cable wire stays ultra flexible even in the most extreme conditions. Pack of 2. Smaller holes provide ventilation while keeping flying and nesting insects out. Fit 3/8 inch and 5/16 inch posts. Measures 1. 625" w x 2. 25" h x 056" d. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Durable polyethylene construction fits standard 4" square RV bumper.

Front-to-back and side-to-side leveling. Sae 4 gauge copper. Works with all 3/4" Hex drive jacks. Grip ribs help keep cap in bumper. 4 awg wire, fits 3/8" stud. Measures 1. 625" w x 2. 25" h x 056" d zinc plated. Helps to show when the RV is level. Screw-mounted. Squeeze grip for easy installation and removal. Heavy-duty forged construction.

More information about Camco 25543


Similar products



EPAuto 20-Inch Battery Inverter Cable Set

EPAuto AA-006-1 - 4 awg wire, fits 3/8" stud. Specification: temperature range: -40°c to +105°c flame Test Rating: UL VW-1 Wire Gauge: 6 AWG Length: 20 inches Max. Fit 3/8 inch and 5/16 inch posts. Works with all 3/4" Hex drive jacks. When installing battery Cables: Install the Postive red cable first before the Negative black cable.

Do not open battery! no sparks. Use battery cable loom to Protect Against Heat and Abrasion where Necessary. A set of positive Red and negative Black small cables. Boat cable wire stays ultra flexible even in the most extreme conditions. Smaller holes provide ventilation while keeping flying and nesting insects out.

EPAuto 20-Inch Battery Inverter Cable Set - Helps to show when the RV is level. Warning. Always connectpositive to positivenegative to negativeto prevent damage to Electrical System Zinc plated. Durable polyethylene construction fits standard 4" square RV bumper. Load flow: 200a 12v safety instruction: when Removing Battery Cables: Remove the Nagative black cable first before the Postive Red cable.

Tin plated 95% copper lugs for superior corrosion and oxidation resistance.

More information about EPAuto AA-006-1


Similar products



NOCO Black HM318BKS Group 24-31 Snap-Top Box for Automotive, Marine, and RV Batteries

NOCO HM318BKS - Fit 3/8 inch and 5/16 inch posts. Nickel-plated copper terminals. Works with all 3/4" Hex drive jacks. Front-to-back and side-to-side leveling. Other search terms include: battery box, battery box with vent, battery box 12v, boat battery box, rv battery box, battery box 27, battery box vent, battery box 31, battery box 24, battery box RV, battery box for camper, battery box group 27, marine battery box, battery box group 24, battery box marine, battery box boat, battery box for boat, and battery box group 31.

Screw-mounted. Heavy-duty grade battery box for automotive, marine, and RV batteries for group 24-31 sized batteries. Features patented locking tabs to fasten the lid to the base securely and an adjustable divider to accommodate various group sizes. Built for rugged environments with an impact resistance down to minus 20 degrees Fahrenheit, oil, and unaffected by acid, gas, as well as, UV exposure.

NOCO Black HM318BKS Group 24-31 Snap-Top Box for Automotive, Marine, and RV Batteries - Limits battery movement and protects against accidental shorting of battery terminals, as well as, collects battery acid and allows adequate ventilation. Certified and tested to meet united states coast guard usCG code of Federal regulations 183. 420, american boat and yacht Council ABYC E-107 specifications, and frustration-free packaging.

And it's certified and tested to meet United States Coast guard USCG code Of Federal regulations 183.

More information about NOCO HM318BKS


Similar products



Camco RV Brass Inline Water Pressure Regulator- Helps Protect RV Plumbing and Hoses from High-Pressure City Water, Lead Free 40055

Camco 40055 - Protects equipment and prevents hose failure, to help prolong equipment life. Smaller holes provide ventilation while keeping flying and nesting insects out. Reduces water pressure to a safe and consistent 40-50 lbs of pressure. Csa low lead content certified. Screw-mounted. Length: 20 inch; max. Heat-resistant up to 105C.

Durable brass construction that is drinking water safe. Attaches easily with 3/4" garden hose threads. Zinc plated. Heavy-duty forged construction. Tin plated 95% copper lugs for superior corrosion and oxidation resistance. Sae 4 gauge copper. Pack of 2. Reduce water pressure to a safe, consistent 40–50 lbs of operational pressure.

Camco RV Brass Inline Water Pressure Regulator- Helps Protect RV Plumbing and Hoses from High-Pressure City Water, Lead Free 40055 - Boat cable wire stays ultra flexible even in the most extreme conditions. For outdoor use only. Reduces time and effort to raise or lower scissor jacks. No need for hand cranks. Hex socket x 1/4-inch hex quick connect shank.

More information about Camco 40055


Similar products



CARTMAN 4AWG 24-Inch Battery Inverter Cables Set, 4Gauge x 24" 1 Black & 1 Red

Cartman - Heat-resistant up to 105C. Complies with california's ab1953 and vermont act 193, Maryland HB 372, and Louisiana HB 471 Low Lead Content Laws. Load flow: 200A 12V. Reduces time and effort to raise or lower scissor jacks. No need for hand cranks. Hex socket x 1/4-inch hex quick connect shank. Front-to-back and side-to-side leveling.

Tin plated 95% copper lugs for superior corrosion and oxidation resistance. 4 awg wire, fits 3/8" stud. Fit 3/8 inch and 5/16 inch posts. Nickel-plated copper terminals. 4 awg wire, fits 3/8" stud. Grip ribs help keep cap in bumper. Three times more conductive. Smaller holes provide ventilation while keeping flying and nesting insects out.

CARTMAN 4AWG 24-Inch Battery Inverter Cables Set, 4Gauge x 24" 1 Black & 1 Red - Heat-resistant up to 105C dry. 1/4" & 3/8" round center hole. Sae 4 gauge copper. Boat cable wire stays ultra flexible even in the most extreme conditions. Heat-resistant up to 105C. Heavy duty safe UL 6 Gauge cables.

More information about Cartman


Similar products



Zoostliss Battery Isolator Disconnect Cut OFF Power Kill Switch for Marine Car Boat RV ATV Vehicles

PF - Three times more conductive. Nickel-plated copper terminals. Works with all 3/4" Hex drive jacks. Fit 3/8 inch and 5/16 inch posts. Rust and corrosion resistant, Solid brass nuts and washers. Designed to work with 1/4-inch hex quick connect chucks. Measures 1. 625" w x 2. 25" h x 056" d. Length: 20 inch; max. Reduces water pressure to a safe and consistent 40-50 lbs of pressure.

Helps to show when the RV is level. Heat-resistant up to 105C. Load flow: 200A 12V. Durable polyethylene construction fits standard 4" square RV bumper. Grip ribs help keep cap in bumper. A set of positive Red and negative Black small cables. Heat-resistant up to 105C. Max. Heavy-duty grade battery box for automotive, marine, and RV batteries for group 24-31 sized batteries.

Zoostliss Battery Isolator Disconnect Cut OFF Power Kill Switch for Marine Car Boat RV ATV Vehicles - Features patented locking tabs to fasten the lid to the base securely and an adjustable divider to accommodate various group sizes. Built for rugged environments with an impact resistance down to minus 20 degrees Fahrenheit, and unaffected by acid, oil, as well as, gas, UV exposure.

More information about PF


Similar products